Warmup Electric Underfloor Heating 150w Sticky Mat Kit

Warmup Electric Underfloor Heating 150w Sticky Mat Kit

BEST PRICE GUARANTEE - Plus Additional SavingsCLICK HERE The BIG SALE Now On!
FREE DELIVERY ON...

Most Items & All Orders Over £500

BEST PRICE GUARANTEE

Found It For Less? We'll Beat It!

EXPRESS SERVICE

Next Day Delivery Available

SECURE PAYMENT

Safe & Easy Shopping

special offer
Warmup Foil Underfloor Heating kit

Warmup Foil Underfloor Heating kit

Warmup Electric Underfloor Heating 200w Sticky Mat Kits

Warmup Electric Underfloor Heating 200w Sticky Mat Kits

Warmup Electric Underfloor Heating 150w Sticky Mat Kit

As low as £82.79
Warmup Electric Underfloor Heating 150w Sticky Mat Kit
Only %1 left
SKU
SPM1
>>Description

Warmup Matting Underfloor Heating Systems are designed to be tough enough for professional use, yet easy to install for do-it-yourself enthusiasts.

The StickyMat System consists of a thin loose wire evenly spaced and taped to a glass fibre mesh with pressure sensitive adhesive, which allows for the fastest and most secure installation method of electric underfloor heating. The system is available in a choice of 150 W/m2 and 200 W/m2 heat outputs.

The Warmup Underfloor Heating Mat System utilises our dual core heating element and with only one power lead to wire, it is easy to install in just a matter of hours, without raising floor levels. The cable is attached in a series of loops to thin but tough underfloor heating mats, to fit floor areas from as small as 0.5m2 and up.

Please ensure all Safety Guidelines are adhered to during and after installation of this product.

Features and benefits

  • Thinnest wire you can buy: 2mm, multi-strand core, double-insulated using advanced fluoropolymers
  • StickyMat with pressure sensitive adhesive, for the fastest and most secure installation
  • Quick installation - Simply roll out the underfloor heating mat with pre-spaced wire
  • The pressure sensitive adhesive ensures that no wire or mesh is raised when tiling or covering with self-levelling compound
  • Can be repositioned easily without losing adhesion
  • Flexible - no customising is necessary
  • Approvals: ASTA BEAB, KEMA, GS, CERTIF, VDE and CE mark
  • Lifetime Warranty
  • SafetyNet Installation Guarantee

Installation

Please Note: The following is intended as a guide only. Always refer to the full installation manual for instructions.

  1. Divide the floor into a series of rectangles. From these measurements you can calculate how many mats you’ll need and what sizes. Exclude permanent or static fixtures from your calculations.
  2. If the floor is screed over concrete, it is advisable to lay insulation boards to minimise heat loss and ensure quicker warm up times.
  3. Lay the first run. At the end of the run cut the mat leaving the cable intact, turn the mat through 90º or 180º and continue laying. When the area is covered, adjust the mat until the loops are equal distance apart. Now attach the mat to the subfloor using the special tape supplied.
  4. You will need to install an RCD fused spur which powers the thermostatic controller/programmer and the matting system heating element network. Lay the temperature probe from the timer-thermostat onto the floor, equidistant between two of the cable loops, and attach it to the floor surface. Now take the unheated power supply cable from the end of the matting system, which should be positioned near the thermostat. Once all the connections have been made to the power supply, run the heater(s) to ensure they are heating up (no more than 10 minutes).
  5. Either lay a thin, self-levelling screed over the mat and leave it to dry before laying tiles or trowel flexible tile adhesive directly over the mat and lay the floor tiles. Once the grouting is complete, let the tile adhesive cure before switching on the system.

Specification

  • Heater construction - Sticky fibreglass mesh with pre-spaced dual core earth screened cable
  • Operating voltage - 220-240V; 50Hz
  • Mat width - 500mm (0.5 metre)
  • Mat thickness - 3mm
  • Inner insulation - Advanced fluoropolymer (ETFE)
  • Outer insulation - Advanced fluoropolymer (ETFE)
  • Output rating - 150 W/m2 and 200W/m2
  • Cold tail length (connection lead) - 3m
  • Heater maximum temperature - 55°C/131°F
  • Approvals - ASTA BEAB, KEMA & GS
More Information
ManufacturerWarm Up
Warranty PeriodLifetime
Write Your Own Review
You're reviewing:Warmup Electric Underfloor Heating 150w Sticky Mat Kit
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?

 

Buy Now - Pay Later

We have several trusted payment options to choose from - Buy Now Pay in 30 Days, classic 6 Interest-Free Credit or longer terms at 12 to 24 months

  • Step 1

    Simply add your
    item to basket

  • Step 2

    Select the desired
    payment option

  • Step 3

    Complete online
    checkout! EASY!!

What Are My Options?

  • PayPal pay in 3 monthly instalments at no extra cost
  • Klarna pay in 3 monthly instalments at no extra cost
  • Klarna pay in 30 days at no extra cost
  • Klarna Interest Free Finance over 6 months
  • Klarna Finance over 12 months at 19.9%
  • Klarna Finance over 24 months at 19.9%
  • Or simply checkout as normal with a debit, credit card or PayPal
  • PayPal - Pay in 3
  • Buy Now Pay In 30 Days
  • 6 Months (0%) Interest Free
  • 12 Months @ 19.9% Low Rate
  • 24 Months @ 19.9% Low Rate

For more information please view our finance page

Price Match
In the extremely unlikely event, you find the same item cheaper elsewhere, simply send us a quick not to say where you have seen it and we'll Price Match it and then some, ensuring the best deal for you!!

We always aim to reply within 2-4 Working hours if not faster.  We need to be able to verify the competitor's price, delivery cost and product availability to allow us to check and offer an unbeatable price **see terms


Please Fill Out The Form

* Required Fields

We found other products you might like!